Firmware (Settings) - HP StorageWorks D2D100 - Backup System User Manual

WARNING!
Before shutting down always ensure that there are no backup or restore jobs in progress and that no
future jobs are scheduled to start whilst the system is shut down. If hosts do not automatically reconnect
to the HP D2D Backup System when it restarts, you must reconnect manually from the iSCSI Initiator on
each host, see "Targets tab" on page 54.

Firmware (Settings)

This page provides information about the firmware version of your HP D2D Backup System and allows
you to upgrade the firmware.
IMPORTANT:
Once you have upgraded your firmware, you will not be able to revert to the earlier version. Always read
the Release Notes accompanying the firmware upgrade carefully to check that the upgrade is compatible
with your configuration.
87
D2D Backup SystemHP D2D4004 and HP D2D4009