Upgrading Tape Drive Firmware; Copy/Export/Import (Tape Attach); To Copy To Attached Tape Drive - HP StorageWorks D2D100 - Backup System User Manual

Upgrading tape drive firmware
Firmware for supported HP Ultrium tape drives may also be updated from this page. Please refer to
http://www.hp.com/support
download required files to a location on your host machine before you use this page.

Copy/Export/Import (Tape Attach)

This page allows you to initiate a manual export/import or copy operation.

To copy to attached tape drive

A copy operation may be performed upon any non blank cartridge in any numbered slot in a library
device. The cartridge data is copied from the HP D2D Backup System to the physical tape drive.
1. In the Web interface select Copy/Export/Import , locate the cartridge that you wish to copy in the
Cartridge list and click on the Copy button next to it.
This displays the Setup page. (Or reports an error if no tape drives are currently attached to the HP
D2D Backup System.)
100
Export, import and copy using an attached tape drive
for details of the latest firmware for your HP Ultrium Tape Drive and