Removing Hard Drive Blanks; Installing Hot-Plug Scsi Hard Drives - HP StorageWorks MSA500 G2 User Manual

50 HP StorageWorks MSA500 G2 Storage System User Guide

Removing hard drive blanks

To remove the component:
To replace the blank, slide the blank into the bay until it locks into place.

Installing hot-plug SCSI hard drives

1. Remove the existing hard drive blank or hard drive from the drive bay
("Removing hard drive blanks" on page 50).
CAUTION: To prevent improper cooling and thermal damage,
do not operate the storage system unless all bays are populated with
either a component or a blank.