ecify the ECP communication mode of the parallel interface. The chan es effective after the
multifunction printer is turned off and then n.
Values:
able*
he ECP communication mode is enabled.
Disable The ECP communication mode is disabled.
Adobe Protocol
Purpose:
To specify PostScript communication protocol fo nterface. You can configure Adobe Protocol
settings for the wireless network. The change becomes effective he multifunction printer is
turned off and then on again.
Values:
Auto
Used when auto-detecting the PostScript communication .
Standard Used when the communication protocol is in AS rface.
BCP
Used w communication protocol is in binary format.
TBCP*
Used when the communication pr upports both ASCII and binary data to switch
between them according pecified control code.
Binary
Used when ial processing is required.
US gs
Use the USB Settings to change printer settings affecting a USB port.
NOTE:
Values marked by an aster are the factory default menu settings.
Fax Settings
Use the Fax Settings menu to configure the basic fax set
NOTE:
Values y an asterisk (*) are the factory default menu settings.
Interval Timer
Purpose:
To specify the interv 255 seconds) of the resend attempts.
N Redial