Table of Contents
Advertisement
For Windows Vista:
a. n Control Panel.
b. Select Netwo rnet.
c.
Select Netw Sharing Center.
d. Select Connect to a network.
e. Select dell_device from the network items listed in Connect to a network.
f.
Select Connect Anyway in the warn g box indication indicating you are
entering an unsecured area.
g. Click lose in the dialog box after confirming the connection is a .
For Windows Server 2008:
a. Control Panel.
b. Select Network Center.
c.
Select t to a network.
6. On the Enter Wireless N ettings screen, set each wireless setting item, and the
Next.
7. When you select the Fixed option button for IP Address assignme, click Change...
and enter th ress and subnet mask on the screen.
TE:
When you enter a fixed IP address, avoid the "169xxx.xxx address used by AutoIP.
8. Set each item o Enter Printer Settings screen, and the Next.
9. On the Printer Software screen, y the software that you want to install and
installation path, and t Next. At this point, the wireless se ecified on the Enter
Wireless Network Settings screen is sent to the multifunction printer.
10. On the W configuration is now complete screen, change the wireless f your
computer to the same as that sent to the multifunction printe hen click Next.
For Windows XP and Windows Server 2003:
a. Select Network Connections from Control P.
b. Right-click Wireless Network Connectio and select Properties.
c.
Select the Wireless Networ tab.
d. Click Advanced.
e. Do either of the following:
When wireless ad-h is set to the multifunction printer:
Advertisement
Chapters
Table of Contents
Troubleshooting
