Dell 3115 Color Laser User Manual page 80

NOTE: If IPsec is enab incorrect settings, you must disable it using the et IPsec menu
on the operator panel.
Reset Print Server
Purpose:
To initialize NVRAM (non-volatile RAM) f etwork feature and reboot the multifunction printer.
You can also in the printer's NVRAM from Reset Defaults he Printer Settings menu.
Values:
itialize NIC NVRAM Memory
and restart printer
Restart Pr
Copy Printer
The Copy Printer Set menu includes the Copy Printer Setting and Copy Printer
Settings Report
You cannot copy the following printer settings:
 Copy Defaults
 Copy lance
 Copy Settings
 aults
Fax Defaults

 Fax s
 Clock Settings
 Addre
Copy Printer S
Purpose:
To he printer settings to one or more of the same model of the multifun nter.
To copy the se another printer, specify the IP address and password of the prin h the
settings are copied in the IP Address text box and P text box. Then, click the Copy the s o
the Host in the above list button. Copying the settings ete. The connection time-out
period is 60 seconds. After that, you ca whether settings were copied to this page. And you
need to check the Copy the settings to the Host in the above list an machine menu of
the Dell Printe ion Web Tool in the destination printer to verify if set e actually copied or
not.
Start button to initialize NVRAM. settings will revert to the
factory default settings and reboot the capability.
ck the Start button to reboot the muon printer.