Clear Nvram - Dell 3115 Color Laser User Manual

Outputs black toner at 20% density on the rea of the paper.
Black20%
After you output the test results, contac
Testing "TonerPalletCheck" o ationChk"
"Toner Pallet Check" taminationChk" are used to diagnose machine problems.
On the Mode menu, go down to TonerPk or ContaminationChk and press
TonerPalletCheck Allows yo ntify the problem with the toner when print quality problems
occur w nting pictures or photos.
Allows you to check for any regular lines or spots when printing quality
ContaChk
problems are occurring.
After you output the test results, c ell.
Change the ECM Mode
You can e disable the ECM mode.
On the Customer Mode menu, go down to Fax/Scanner DialogParameterFax
PaCapability ECM, and then press
*
Enables the ECM mode.
Enable
Disable Disables the ECM mode

Clear NVRAM

You can restore the original factory menu settings by initializing NVRAM.
Press until >SETUP rs, and then press
Press >Admin Menu appears, press
until >Maintenance appears, and then press
Press until >Init NVRAM appears, and then press
The Are you sure? message appears on the operator pane
Turn off t function printer, and then on again.
Others
.
.
.
.
.
.