Changing The Fax Settings; Sending A Fax - Dell H625cdw User Manual

Specifying the Fax Initial Settings Using the Operator Panel
To set the fax settings manually from the operator panel, set the following menus.
NOTE:
• You can set the same setting using Dell Printer Configuration Web Tool. See "Dell™ Printer
Configuration Web Tool."
• If Panel Lock Control is set to Enable, enter the password when entering Admin Settings.
See "Panel Lock."
• Fax Number, Country, Fax Header Name, and Line Type:
From the
Settings Fax Line Settings
If you use DRPD option, you can set DRPD Pattern here.
NOTE:
• When you configure the country setting, the settings relevant to it is initialized.
• Receive Mode:
From the
Settings Incoming Defaults
• Tone / Pulse:
From the
Settings Transmission Defaults
For details about each menu, see "Fax Settings."

Changing the Fax Settings

1 Press the
2 Tap the Tools tab
If Panel Lock Control is set to Enable, enter the password. See "Panel Lock."
3 Select the desired menu.
4 Select the desired setting or specify a value.
To specify a value, tap – or +, or use the number pad or the keyboard.
5 Tap OK.
6 Repeat steps 3 to 5 as needed.
For available options, see "Fax Settings."

Sending a Fax

You can fax data from the printer. You can also directly fax data transferred from a
computer running a Microsoft
Sending a Fax From Memory
1 Load the document(s).
See "Loading Documents."
2 Press the
Fax.
3 Tap
248
| Faxing
(Information) button
(Information) button
(Information) button
(Information) button.
Admin Settings
®
Windows
(Home) button.
Tools tab Admin Settings
Tools tab Admin Settings
Tools tab Admin Settings
Fax Settings.
®
operating system or a Macintosh computer.
Fax
Fax
Fax