Dell 3115 Color Laser User Manual page 562

9300
9300K
This option is available only for color printing and when ent is RGB data.
-Cb=cyan-low:cyan-middle:cyan-high:magenta-low:magenta-middle:magenta--
low:yellow-middle:yellow high:black-low:black-middle:black-high
Specifies nt value for color balance of each color/density.
Available adj alues are as follows:
+3
Dark 3
+2
Dark 2
+1
Dark 1
0
1
Light 1
-
Light 2
-3
Light 3
-Cb
Option value must be specified i lowing order:
Cyan low density, Cyan medium density, Cyan high d agenta low density, Magenta medium
density, Magenta high density, Ye density, Yellow medium density, Yellow high density,
Black low densi k medium density, Black high density
If e is specified, it is treated as "0"(Normal).
For example, if yo pecify "Light 2" for Cyan medium density, "Dark 3" for Yellow hig , and
"Dark 2" for Black low density, it can be specified using eit he following:
-Cb=
-Cb=
-Hld=PrintType:UserID:Password:DocumentName