Using Advanced Fax Settings; Changing Setting Options; Advanced Fax Setting Options; Broadcast Report - Dell 1125 Mono Laser MFP User Manual

1. Press Scroll (<>) to select Fax and press Select (P).
2. Press Scroll (<>) to select Reports press Select (P).
3. Press Scroll (<>) to display the report or list you want to print on the bottom line.
Directory: Directory list
l
Scheduled Jobs: Scheduled job information
l
Activity Report: Shows all fax activity
l
4. Press Select (P).
The selected information is printed.

Broadcast Report

Additionally, the MFP has a broadcast confirmation setting. The default for this setting is Off (see
report, perform the following steps.
1. Press Scroll (<>) to select Fax and press Select (¸).
2. Press Scroll (<>) to select Fax Default and press Select (¸).
3. Press Scroll (<>) to select Other Settings and press Select (¸).
4. Press Scroll (<>) to select MSG Confirm and press Select (¸).
5. Press Scroll (<>) to select On and press Select (¸).
6. The LCD displays Saved and returns to the MSG Confirm menu.
Once this setting is configured, a report is produced after every broadcast, regardless of failure or success.
Using Advanced Fax Settings
Your printer has various user-selectable setting options for sending or receiving faxes. These options are preset at the factory, but you may need to change
them. To find out how the options are currently set, print the System Data list as follows:

Changing Setting Options

1. Press Scroll (<>) to select Fax and press Select (P).
2. Press Scroll (<>) to select Advanced Fax and press Select (P).
3. Press Scroll (<>) until you see the desired menu item and press Select (P).
4. When the option you want displays, choose the desired status by pressing Scroll (<>) or enter the desired value using the number keypad.
5. Press Select (P) to save the selection.
6. You can exit from the setup mode at any time by pressing Cancel (V).

Advanced Fax Setting Options

Option Description
Recv You can set your printer to forward incoming faxes to another fax number during a specified time period. When a fax arrives at your printer, it
Forward is stored in the memory. Then the printer dials the fax number that you have specified and sends the fax.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the fax number to which faxes are forwarded and the start time and the end time. Also, you can
forward incoming faxes up to 25 fax numbers.
Setting Fax Default Options). To enable the broadcast