7.
button
Choose the currently displayed menu or
8.
(Cancel) button
In the Menu mode, returns to the standby mode without savin ttings.
Cancels the current working job (coprint) by choosing the available listed job.
9. Number pad
the characters and numbers, for example, for the Phone Book, and pas
10.
(Pause) b
Enters a pause.
Printing a Panel Settings Page
The Panel Settings page shows current sett the operator panel menus.
1. Press
until >SETUP appe then press
2. ess
unt >Reports appears, and then
3. Press
until Panel Settings appears, and then press
The panel settings page is printed.
12. System Settings
You can change most system settings from your software p r operator panel. If your
multifunction printer is attached to the network, you can change settings from the Dell
Printer Configuration Web Tool. To l Dell Printer Configuration Web Tool printer IP
address in your Web browser. Print a printer settings p nd your printer's IP address (see
System Settings
Page(See 12.)").
Settings from the software pr e the default system settings for the multifunction printer. Sett
m the printer driver only apply to the job you are sending to the muln printer.
If you cannot ch tting from your software program, use the printer operator panel or Dell
Printer Configuration Web Tool. system setting from the printer operator panel or from
the Dell Printer Configuration Web Tool makes that set user default.
inting a System Settings Page
.
.
"Pri