Replaci ator Rollers
There are three separator rol the multifunction printer which need to be replaced periodically.
the tray and the others are inside the multifunction printer. Basi the separator rollers are
replaced in the same way as described i ection.
CAUTION:
To pr ic shock, always turn off the multifunction printer and
disconnec ower cable from the grounded outlet before performing
maintenance.
Before performing any of the procedures, read and follow the safety
instructions in your Owner's Manual or Product on Guide.
l separator rollers are available only through Dell. To order by pho
31.)" in the Owner's Manual or in this manual.
Dell recommends parator rollers for your multifunction printer. Dell does not provid ty
coverage for problems caused by using accessories, parts, or comp t supplied by Dell.
Removing the Used Separator Roll
NOTE:
Remove an obs from the tray before pulling the tray out of the multifunction
Pull the tray out of the multifuncti r until it stops. Hold the tray with both hands, lift the
front slig d remove it from the multifunction printer.
"Contacting
Dell(See