Adobe Protocol - Dell 3115 Color Laser User Manual

1
IP Filter* No. n/Address (n )
No. n/Mask (n is 1-5.)
No. n/Mod (n is 1-5.) Off*
1
* This item is ailable for LPD or Port9100.
Initialize NVM
Purpose:
To initialize wire work data stored in NVRAM.

Adobe Protocol

Purpose:
To specify PostScript commn protocol for each interface. You can configure dobe Protocol
settings for the wireless network. The cha mes effective after the multifunction printer is
turned off and the in.
Values:
Auto Used when auto-detecting t Script communication protocol.
Standard Used when the communication protocol is in ASCII interfac
BCP Used when the communication proto in binary format.
TBCP* Used e communication protocol supports both ASCII and binary data to swit en
them according to the specified control code.
ry Used when no special processing is requi
Paral ings
The Parallel Settings menu can be adjusted to configure t lel interface.
NOTE: Values marked by an asterisk (*) are the fac ault menu settings.
ECP
Purpose:
Sets the IP address for Filter n.
Sets the ma Filter n.
Dis IP Filter feature for Filter n
Accept Accepts an access from specified IP
Reject Rejects an access from specified I s.