Dell 3115 Color Laser User Manual page 506

-y hld=UserID::
-y -jown= job assword Authentication Setting
Specifies the job owner d password for authentication.
When only er name is specified (-Jown=jobownername:) (no password
specified), cation password is treated as not specified.
When only is specified (-Jown=:password) (no job owner name
specified), login ame is used as job owner name. Entered password
is used as authentica sword.
When neither of job owner password is specified (-Jown=:), login user
name is used as job ow nd authentication password is treated as not
specified.
When a job owner name exceeds allowable character length, t characters
are ignored.
When an unacceptable character is specified for job own "Unknown User"
is used as job owner name.
NOTE: Characters le for job owner name are alphanumeric characters and symbols,
excep ace and colon.
NOTE: 32 characters are acceptable for job owner name.
When an unacceptable charact ified for password, or when a specified
password is not within the f the allowable character length, the
authentication password is tre ot specified.
NOTE: ers are acceptable for password.
NOTE: Acceptable passw th is between 4 and 12 characters.
complete form of -Jown option is treated as no authentication se ng made. In such case, if
authentication setting is made with the enal variable, it is used as setting information.
P (HP-UX)
This section provides information on prin m the registered logical printer during the
installation.
Printing From HP-UX
int to the default printer:
If the multifunction printer is registered as the defaul , the name of the multifunction printer
can be shortened and specifi own in the following example.