Group Dialing; Setting Group Dial - Dell 3115 Color Laser User Manual

a. Press until >FAX appears, and then press
b. Press until >Speed Dial ap
c. Use the uttons to enter the three-digit speed dial number between 001 and
20 the number keypad, and then press
The corresponding entry's name brief ays. To confirm the name again, press
.
3. Adjust the document resolution to suit your s (see
Resolut(See 18.)").
If you need to change the contrast, see "er/Darker(See 18.)".
4. The doc into the memory.
When the docume d on the document feeder glass, the LCD display asks if you want
another page. Press
immediately, and then press
5. The fax number stored in the speed dial location is autom dialed. The document is
sent when the remote fax machine answers.
NOTE: Using the ) in the first digit, you can send a document to multiple locatio
example, if you enter 00*, you can send a document to the locations ed between 001
and 009.

Group Dialing

If you frequently send the nt to several destinations, you can create a group of these desti
nd set them under a two-digit group dial location. This enables you group dial number
setting to send the same document to all the des in the group.
NOTE: You cannot include one ial number within another group dial number.

Setting Group Dial

1. Press until >FAX and then press
2. ss unti >Add PhoneBook Entry appears en press
3. Press unt >Group Dial appears, and th
4. Enter digit speed dial number between 1 and 6, using the number keypad, an ress
.
If a num lready stored in the location you chose, the display shows the numbe ow
you to change it. To start over with another speed-dial number Back.
5. Enter the ou want to store using the number keypad, and then press
To insert a pause between numbers, press Pause. "-" appears on the display.
6. To assign a name to the number, enter e. For details about how to enter names, see
"Using the Number Keypad to Enter
I o not want to assign a name, skip this step.
to select Yes to a documents or to select No t sending the fax
.
.
.
Characters(See 18.)".
.
.
"Adjusting the Document
.