8. Turn on the mult printer.
NO
The multifunction printer will automatically detect the at ray but will not detect the
paper type.
9. Print a system settings page to verify that the optional 550-sh eeder is installed
correctly.
a. Press
un >SETUP appears, and then p
b. Press
until >Reports appears, and then press
c.
System Settings s displayed. Press
The system settings printed.
d. Verify 550 Sheet Feeder is listed i stem settings under Printer Options.
If the tray module is ted, turn off the multifunction printer, unplug the power cable, an ll the
optional 550-sheet paper feeder.
10. oading paper in the installed tray, specify the paper type from the perator panel.
a. Press
until >SETUP ears, and then press
b. Press
until >Tray Settings appears, and then press
c.
Press
until the installed tray appears, a ress
d. Press
until >Paper Typ appears, and then press
e. Press
until >Paper Size s, and then press
.
.
.
.
.
.
.
.