Changing the Clock Mode
You can set the current time using either the or the 24-hour format.
1. Press
il >SETUP appears, and ss
2. Press
until >Admin Menu appears, and then press
3. Press
until >System Settings appears, and then press
4. Press
until >Clock Settings appears, and then press
5. Press
until >Time Format appears, and then press
6. Press
until the desired format appea n press
7. Press Canc to return to the standby mode.
Setting Sounds
Ringer, Key Sounds and Alarm Sounds
1. Press
until >SETUP ap nd then press
2. s
unti >Admin Menu appears, and the
3. Press
until >System Settings appears, and then press
4. Press
until >Alert Tone appears, and then press
5. Press
until the desired tone appears, an ress
6. Press
until the desired volume appears, and then pre
The multifunction printer works normall f the ringer is turned off.
7. ess Cancel to return to the stand
Speaker Volume
NOTE:
You can turn on/off the speake hen the telephone line is connected.
1. Press
until >FAX appears, and then press
2. Press
until >OnHook appears.
.
.
.
.
.
.
.
.
.
.