Dell 3115 Color Laser User Manual page 315

Checking whether a fax was sent in color
Even send a color fax, if the receiver does not have a color fax functio their color fax
function is turned off, the fax is sent in black and The following procedure explains how to
check if a fax was sent i black and white.
n the panel:
Colo or Black & White splayed on the operator panel while a fax is sending.

While a fax is sending in color, Color appears on the fourth line of the LC

While a f nding in black and white, Black & White appears on the fourth line of
panel.
Check activity report:
You can check the Mode the activity report.

If t as sent in color, "Color" is output on the report.

If the fax was sent in black and white, G3, ECM is output on the report.

If a fax sent as color is changed to black and white, *G3, * *ECM is output on the
report.
Check on the monitor report:
You can check in the mode field on the monitor if a monitor report is set to be output by Fax
Transmit (Setup  Admin menu  System Settings
Not Print Does not print the report.
Print at Error* Prints the report when a communication error is detected.
Always Always prints the report for the fax transmission.

If the fax was sent in "Color" is output on the report.