Dell 3115 Color Laser User Manual page 172


Have cessive curl or twist

Are stuck together o d in any way

Contain windows, holes, perforations, cutouts sing

Use metal clasps, string ties, or metal fol rs

Have an interlocking design

Have postage stamps

Ha xposed adhesive when the flap is in the sealed or closed position

Have nicked edges or bent corners

Have rough, cockle, or laid fin

Use envelopes that can d temperatures of 205°C (401°F) without sealing, excessiv ,
wrinkling, or releasing hazardous emissions. If you have any doubt the envelopes
you are considering, check with the envelope supplier

A e guide to fit the width of the envelopes.

To load envelope in the multipurpose feeder, insert the envelo the flaps closed and
the short-edge of the envelopes facing into th ifunction printer. The print side must
be facing down.

See "Loading the Mue

Use one envelope size during a p .

Ensure the humidity is low becaus dity (more than 60%) and the high printing
temperatures may seal opes.
Labels
Your multifunction printer can print on many designed for use with laser printers. Label
adhesives, face sheet stock), and topcoats must be able to withstand temperatures of 205°C
(401°F) and pressure of 25 pounds per square inch (psi). Befo g large quantities of any print
media, Dell recommends trying a sampl
When printing on labels:

Set the paper type to Labe in the Tray Settings e paper type to Label from the
print .

D ad labels together with paper or transparencies in the same tray. Th esult in a jam.

Do not use label sheets with a slick backing material.

Do not print within 1 mm (0.04 in.) of the

Use full label sheets. Partial s y cause labels to peel off during printing, resulting in a
jam. Part ets also contaminate your multifunction printer and your cartridge ve, and
could void your multifunction printer and cartridge warran
Feeder(See 10.)" for instructions on loading an envelope.