Dell 3115 Color Laser User Manual page 75

Bonjour Host
(m Name
Printer
Name
NOTE: An optional multi-protocol card is display the Bonjour (mDNS)
SNMP
Purpose
To configure the detailed settings of SNMP.
Values:
SNMP unity Name
*1
Agent (Read only)
ommunity Name
*1
(Read/Write)
Community
*1
Name (Trap)
Trap Notification
1-4
Specifies the host name up to 63 alpha haracters and "-" (dash).
The original setting will remain valid i is made.
Sp printer name up to 63 alphanumeric characters and symbol
sets. T nal setting will remain valid if no input is made.
Specifies the community name to access ( ) the data up to 31
alphanumeric characters.
The original setting will remain if no input is made. Characters
entered for community name in previo ngs will not be
displayed on the screen. The default Read Community .
Specifies the community name to a ead and write) the data up
to 31 alphanumeric characters.
The original se emain valid if no input is made. Characters
entered for community n previous settings will not be displayed
on the screen. The default e Community is private.
Specifies the commu e used for trap up to 31 alphanumeric
characters.
The original settings will remain valid input is made. Characters
entered for Community Name (Trap) in pre ngs will not be
displayed on the screen. The default Trap Communit (NULL).
Select the check boxes to trap occurrence. In this case, specify
the IP address and IP socke following format:
·IPv4
Specify the ess and IP socket in the
nnn.nnn.nnn.nnn:mmmmm format. Each section is a variable
value between 0 and 255. Note that values 127 and 2 not valid
for the first three-digits only. IP socket mmmmm is a va lue
between 0 and 65535.
·IPv6
Speci IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:x format. Each section
of "xxxx" is a hexadecimal variable value betw d ffff. IP socket
mmmmm is a variable value between 0 and 65535.
·IPX
Specify the IPX address in the
nnnnnnnn.mmmmmmmmmmmm.llll form twork nnnnnnnn is a
hexadecimal variable value between 0 and ffffff ode