NOTE:
that the memory card is firmly fixed in the slot and cannot be mov y.
6. Close the control board cover and turn ew clockwise.
7. Turn on the multifunction print
8. Print a system settings page to verify that the nal print memory is installed correctly.
a. Press
until >SETUP appears, and then press
b. Press
l >Reports appears, an ress
c.
System Settings is displayed. Press
The system settings page is printed.
d. Verify the capacity installed memory listed in the system settings under
eneral.
If the memory capacity has not increased, turn off the multifun nter, unplug the power cable,
and reinstall the memory card.
.
.
.