Dell 3115 Color Laser User Manual page 460

CAUTION: Do the inside of the multifunction printer. Some parts may be hot.
Al for the multifunction printer to cool before attempting to remove p this
area.
Hold both sides of the transfer belt unit w hands and pull up the left side of the unit until
the peg on the omes out of the groove. Then, shift the transfer belt unit to the nd
remove the unit from the multifunction printer.
talling a New Transfer Belt Unit
Unpack a new transfer belt unit.
Inse eft peg into the corresponding left side belt unit hole, then align t peg with the
groove, and then push down on the right side of the t belt unit to seat into place.
Close the trans unit by pulling it down until it clicks.