If the multifunction printer red as the default printer, the name of the multifunction pr an be
shortened and specified as shown in the following example
% lpr ename
To print to other muon printer:
o print to a multifunction printer named dell, type as follows:
% lpr -Pdell3115cn filename
To select a paper tray for printing:
To select a paper tray fo ng, the .dellpsdefault3115 file must be executed in advance to
defin ltifunction printer which uses the desired paper tray.
To select tray 2 (optional 550-she feeder) for printing, execute the .dellpsdefault3115 file
and define tifunction printer so that it feeds paper from tray 2. Specify tray2, which is the
defined printer name, as
% lpr -Ptray2 filename
out /usr/local/dellbin3115/.dellpsdefa:
This is the file for system default settings when using variou es via /etc/printcap. Here it
is referred to as the default command optio g file.
Method:
To define a multifunction printer named a4d which prints on A4 with the long-edge binding
feature turned on, e following steps.
Procedure:
Register the printer a4d with /etc/printcap.
(LPRng):
/etc/printcap.local or /etc/printcap
a4d:\
:bk:\
:bkf:\
:lpd_bounce=
:sd=
:af=