Loading Letterhead - Dell 3115 Color Laser User Manual

guide at the back tray.
4. Before loading th media, flex the sheets back and forth, and then fan them. Straigh
es of the stack on a level surface.
5. Place the print media into the tray with ommended print side face up.
NOTE: Do not exceed the fill line in the tray. Overfilling the tray may cause paper jams.
6. Adjust the width guides until they rest lightly aga edges of the stack of paper.
NOTE: hen loading user-specified print media, adjust the width guides a e extendable
part of the tray by squeezing the length guide and sl until it rests lightly against the
edge of the stack of paper.
7. Insert the tray into the multifunction pr d push until it stops.
8. paper type from the operator panel if any print media other than nt media is loaded.
If a user-specified print media is loaded, you m fy the paper size setting by using the
operator panel.

Loading Letterhead

The letterhead must be toward the top edge of the standard tray o nal feeder with the print
side facing up. However, the letterhead inserted top edge first with the print side facing
down when loadin into the multipurpose feeder.
Print media source
Standard 250-sheet Face up
Print side
head enters the multifunction
Page orientation