Identifying Print Media Sources And Specifications - Dell 3115 Color Laser User Manual


e labels that can withstand temperatures of 205°C (401°F) sealing, excessive curling,
wrinkling, or releasing hazardous emissi

Do not print within 1 mm (0.04 in.) of the edge of th of the perforations, or between
die-cuts of the label.

Do not use label s at have adhesive to the edge of the sheet. Dell recommends zone
c f the adhesive at least 1 mm (0.04 in.) away from edges. Adhesive ma
ontaminates your multifunction printer and could void your warrant

If zone c the adhesive is not possible, a 3 mm (0.125 in.) strip should be r the
leading and driver edge, and a non-oozing adhesive should be us

Remove a 3 mm (0.125 in.) strip from the leadin prevent labels from peeling inside
the multifunction printer.

Portrait on is preferred, especially when printing bar codes.

Do not use labels that have exposed adhesiv
rint Media
For proper print media storage, wing guidelines help avoid media feeding problems and
uneven print q

best results, store print media in an environment where the tempera approximately
21°C (70°F) and the relative humidity is

Store cartons of print media on a pallet or shelf, rather ectly on the floor.

f you store individual packages of print media out of the original c nsure that they
rest on a flat surface so that the edges do not b rl.

Do not place anything on top of the print me ges.
Identifying Print Media Sources and
Specifications
The following tables provide information on s optional print media sources.
Prin a Sizes and Support
A
A5
Multipurpose Standard 250-
feeder sheet
Y Y
Y
tional 550-sheet Optional
paper feeder duplexer
Y
Y Y