Dell 3115 Color Laser User Manual page 171

You can load up to 75 sheets of encies in the multipurpose feeder for a single print job.
Before buy quantities of any print media, Dell recommends trying a sample first
When printing on transparencies:

Set the paper type to Transparency the printer driver to avoid damaging your
multifunction printer.

Use transpar signed specifically for laser printers. Do not use regular transpa
ransparencies must be able to withstand temperatures of 205°C °F) without melting,
discoloring, offsetting or releasing hazardou ns.

oid getting fingerprints on the transparencies. This may result in int quality.

oading transparencies, fan the stack to prevent sheets from sticki er.

Non-white ncies are not supported with the multifunction printer.
Selecting Transparencie
The multifunction printer can print directly on es designed for use in laser printers. Print
quality and durabili d on the transparency used. Before buying large quantities of any pr ,
Dell recommends trying a sample first.
The paper type setting for the multipurpose f ould be set to Transparency prevent jams.
(See "Tray Settings(See 13.)" for detailed information about this setting.) Check with the
man or vendor to determine whether your transparencies are compatible w printers that
reach temperatures as high as 205°C (401°F). e transparencies that are able to withstand
these temperatures witho ng, discoloring, offsetting, or releasing hazardous emissions.
Envelopes
can load a stack of envelopes up to 15 mm (0.59 in.) in height in t purpose feeder for a
single print job. Depending on the type of env d how they have been stored, loading a large
quantity of envelope e maximum range, may not feed into the multifunction printer. If th ns,
reduce the number of envelopes in the stack. Depending on the cho nvelopes, it is possible
to expect variable levels of light wrinkli e buying large quantities of any print media, Dell
recommends trying first. See
loading an envelope.
When printing on envelopes:

Use only hty envelopes that are designed for use in laser printers.

Set the print media source to th rpose feeder. Set the paper type to Envelope, and
select the correct size of envelope from the printer driver.

For best performance, use envelopes made from 75 g/m
can use up to 105 g/
is 25% or less. Envelopes with 100% c tent must not exceed 90 g/m

Use only new, undamaged envelopes.

best performance, do not use envelopes that:
"Loading the Multipurpose
2
(28 lb bond) weight for the envelop long as the cotton content
(See 10.)" for instructions on
2
(20 lb bond) paper. You
2
(24 weight.