Dell 3115 Color Laser User Manual page 391

You need to know the settings for the wireless network to se wireless printer. For details of
the settings, contact your network trator.
Wireless S
Settings
N ype
Security Se
Settings
Transmit
Key
WEP Key
Pass
Phrase
TE: To set WPA2-PSK as security, select WPA-PSK AES.
Wireless Installation usin onnection
NOTE: tional multi-protocol card with the Wireless LAN Adapter attached mu stalled on
the multifunction printer.
Step 1. Install a nction printer to the already-operating
wireless network (When wi ng is already set to your computer)
I e Drivers and Utilities CD into your .
The Drive Utilities CD should launch the installation software aut
If the C not automatically launch, click StartRun, type Setup.exe (where D is the
drive letter of your CD), and ck OK.
NOTE: For Windows Vista, click tinue when the User Account Control dialog box
appears.
Select the Network Installation option button, and then click Next.
he Configure Wireless Printer using a USB conn ecommended) option button, and
then click ext.
Reset the wireless setting of the multifunction printer follow ps on the Reset Wireless
Setting s
In t isplayed on the Select Printer screen the check box of the target printer that you
are making wireless se or, and then click Next. On the Enter Wireless Network
Settings screen, set each etting item, and then click Next. W ect the Fixed IP
Specifie that identifies the wireless network. Up to 32
alphanumeric charac
Spe network type from Ad-hoc or Infrastructure.
Selects the method from No security, WEP, WPA-PSK TKIP and
WPA-PSK AES.
Specifies the transmit the list.
Specified the WEP key through the wireless network only when
WEP is selected for Security
cifies the pass phrase of alphanumeric characters from 8 to 63
bytes ly when WPA-PSK is selected for Encryption.