Dell 3115 Color Laser User Manual page 302

5. s the butt Disable appears, then press the
Mo
Some of the legacy fax devices do not support th odem speed of 33,600 bits per second
(bps). You may experience fax s eceive errors due to the higher modem speed. You can
disable the V.3 he following instructions.
1. When the printer is in Cu , select Fax/Scanner Diag s
2. Press the button until Parameter appears, then press the
3. Press the button until FAX Parameter appear press the
4. Press the button until Capability V34 appears, then press the
5. Press the button until Disable a then press the
You can also reduce the modem speed if yo ue to experience fax communication problem.

14,400bps (V.17)

9 (V.29) or

4,800bps (V.27ter).
You can change the modem transmission speed wi following instructions.
1. When the printer is in Customer Mode select Fax/Scanner Diag and press
button.
2. Press the button until P appears, then press the
3. the but FAX Parameter appears, then press
4. Press the button until G3M em Speed appears, then press the
5. Press the button until V17 appears, then p
V29 to e 9 (9,600bps), or select V27ter to ena ter (4,800bps).
You can change the modem receive speed with the fol nstructions.
1. e printer is in Customer Mode, select Fax/Scanner Diag and press
2. Press the button until Parameter ears, then press the
3. Press the button until FAX Parameter appears, then press the
4. Press the button until G3M RX Modem appears, then press the
button to disab
b
button.
tton.
button.
button to disable V.34.
button.
button.
button.
button t V.17 (14,400bps), select
button.
button.
button.
button.