Automatic Dialing; Storing A Number For Speed Dialing - Dell 3115 Color Laser User Manual


If the fax was sent in black and white, G3, SG3 or ECM is ou report.

If nt as color is changed to black and white because the receiver could ept a color
fax, *G3, *SG3, or *ECM is output on the report.

Automatic Dialing

ng
You can store up to 200 frequently dialed nu speed dial locations (001-200).
When the speed dial job specified in the delayed fax or redial exis ou change the speed dial
number from the operator panel or Dell Prin iguration Web Tool, the destination of the fax
may be changed.

Storing a Number for Speed Dialing

1. Press until >FAX ars, and then press
2. Press il >Add PhoneBook Entry rs, and then press
3. Press til >Speed Dial appears en press
4. he three-digit speed dial number between 001 and 200, using the nu pad, and then
press .
5. the settings for Name, Phone Number, and Delete Dial by using
keys.
If a number is already stored location you chose, the display shows the number to
allow you to ch To start over with another speed-dial number, press ack.
6. Enter the number you want to stor the number keypad, and then press
To insert a pause between numbers, press P. "-" appears on the display.
7. To assign a name to the number, enter the name. For details w to enter names, see
"Using the Numbe to Enter
If you do not want to ame, skip this step.
8. Press Back when the name appears correctly or without a name.
9. To store more bers, repeat steps 4 through 6.
o return to the standby mode, press Cancel
Sending a Fax Speed Dial
1. Load the (s) face up with top edge in first into the ADF.
OR
Place a single document fac n the document feeder glass.
For details about loading a document, see
2. To enter the speed dial number do either of the followin
.
Characters(See 18.)".
"oading an Original
.
, and number
.
Document(See 18.)".