Table of Contents
Advertisement
b. Right-click Wireless Network Connectio and select Properties.
c.
Select Wireless Network tab.
d. Ensure that the check box for Use Windows to configure my wireless
network settings is .
e. Click Advanced.
f.
Do either of the following:
wireless ad-hoc mode is set to the multifunction printer:
Select Computer to Computer (ad hoc) networks only and cl Advanced
dialog box.
When wireless infrastructure mode is set to the mion printer:
Select Access point (Infrastructur ks only and close the Advanced log
box.
Click Add to display Wireless network properties.
o
Enter th that you send to the multifunction printer and click OK.
o
Click Move up to move the setting to the top of the list
o
Click OK the Property dialog box.
o
NOTE:
When your operating system is earlier than Windows 2000, creat gs according to
the manual of the wireless setting tool provided by eless device manufacturer.
or Windows Vista:
a. Open Panel.
b. Select Network an t.
c.
Select Network an g Center.
d. Select to a network.
e. Select the setting you the multifunction from the network items listed in
nnect to a network.
f.
Select Connect Anyway in ning dialog box indication indicating you are
entering an unsecured a
g. Click Close in the box after confirming the connection is a success.
Windows Server 2008:
a. Open Control Pa.
b. Select Network and Sharing Center
Advertisement
Chapters
Table of Contents
Troubleshooting
