Dell 3115 Color Laser User Manual page 497

Sets the font siz oint.
-y outcolumn=n
This option converts text to single-byte tex ts printing to start from the nth column.
-y outline=n
Sets printing to start from the nth line.
ont=
font for printing single-byte alphanumeric characters. If the font is not available for the
multifunction printer, the default fonts
NOTE: To specify a font, typ nt name as-is after the -y font= ption.
% lp -y font=Courier-Oblique filename
NOTE: For information on the available fonts, see the PS Fonts List.
-y margiu:b:r:l
Sp margin of a page in inches. The u rgin), b (bottom margin), r (right margin), and l argin)
are positive real numbers (up to two decimal points). The def 0.
-y ps
The input file will ed as the PostScript file. If the file does not begin with "%!", l be output to
the beginning line. Whether the file contains "%!" wil ored.
To print text/PostScript files:
-y DuplexBook
Enables the long-edge binding feature. When it is specified, t direction or position will be
adjusted and both sides of the pap d so that the longer edge of the pages can be bound.
-y DuplexList
Enables the short-edge binding feature. When it is specif printing direction or position will be
adjusted and both sides of printed so that the shorter edge of the pages can be bound.
-y tray-input
The paper tray-related parameters that can be specifi e lp command are as follo
tray1
Feed paper from tray 1 (Standard 250-sheet tray).
tray2
Feed paper from tray 2 (Option heet paper feeder).
a4
Feed paper from the tray loaded with A4 (210 x 297 mm).