Fax Settings - Dell E525w User Manual

Values:
No. n/Address
(n is 1-5.)
No. n/Mask
(n is 1-5.)
No. n/Mode Reject
(n is 1-5.)
Accept
Off*
NOTE:
This item is only available for
Initialize NVM
Purpose:
To initialize network data stored in NVM (non-volatile memory). After executing this function and rebooting the
printer, all network settings are reset to their default values.
Values:
Yes Initializes network data stored in NVM.
No* Does not initialize network data stored in NVM.
PS Data Format
Purpose:
To specify the PostScript 3 Compatible communication protocol. You can configure the PS Data Format settings for
the wired network.
Values:
Auto*
Sets the PostScript 3 Compatible communications protocol automatically.
Standard Sets the PostScript 3 Compatible communications protocol to Standard.
BCP Sets the PostScript 3 Compatible communications protocol to BCP.
TBCP Sets the PostScript 3 Compatible communications protocol to TBCP .
Wi-Fi
Purpose:
To enable the wireless connection.
Values:
Off
Disables the wireless connection.
On* Enables the wireless connection.
NOTE:
This item is available only when the Ethernet cable is disconnected.
NOTE:
When you use the USB connection and do not use the wireless connection, you need to disable the wireless LAN.

Fax Settings

Use this menu to configure the basic fax settings.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
142
Understanding the Printer Menus
n
Sets the IP address for Filter
Sets the address mask for Filter
Rejects an access from the specified IP address.
Accepts an access from the specified IP address.
Disables the feature for Filter
or .
LPD Port9100
.
n
.
n
.