Dell 3115 Color Laser User Manual page 369

Problem
Print is too light.
Toner smears or print
comes off page.
Toner spots appear on
the page/printing is
blurred.
Action
· The print cartr y be low or need to be replaced. Confirm the
amount of toner in eac cartridge and replace it with a new one if
necessary.
· Set the Toner Saving Mode to off in the Advanced tab in the
driver.
· If you are printing on an uneven print surface, change the Paper
Type settings in the Tray Settings menu. See
13.)."
· Verify that the corr t media is being used.
· If you are printing on an uneven print surface, change the Paper
Type settings in the Tray Settings menu. See " ttings(See 13.)".
· Verify that the print media n the printer specifications.
· The fuser unit is old or damaged. Replace the fus ee
Fuser Unit(See 25.)
· Check the print cartridges to ensure that they talled correctly.
· Change the print cartridges. See
"em Settings(See
"Replacing the
"cing Print Cartridges(See 25.)".