Loading Letterhead; Linking Trays - Dell 3010cn - Color Laser Printer Manual

7. Insert the tray.
8. If you load any print media into the tray, configure the Paper Type and Paper Size settings for that tray according to the message.

Loading Letterhead

Place the printed side face up.
Print media source
Optional 250-sheet tray module or 500-sheet tray module Face up
Multipurpose feeder

Linking Trays

Tray linking allows you to load the same size and type of print media in multiple sources. The printer automatically links the source/trays and uses the first tray
until it runs out, then switch to the linked tray.
If you load the same size print media in each tray, make sure the print media is the same type in order to link the trays.
When the selected trays are loaded with the same size and type of print media, select the Paper Size and Paper Type settings in the Tray Settings for each
source.
To disable tray linking, set the Paper Size and Paper Type to a unique value in each one of the trays. If all trays do not have the same type of print media
when linked, you could mistakenly print a job on the wrong paper type.
Using the Center Output Tray
Print side
Face up
Page orientation
Back of tray
Letterhead enters the printer first.