Loading Print Media
Loading print media properly helps prevent jams and ensures trouble-free printing.
Before loading any print media, identify the recommended print side of the print media. This information is usually
indicated on the print media package.
The images used in this manual are those of the Dell™ C3760dn Color Laser Printer unless otherwise mentioned.
Tray1 and the optional 550-sheet feeder (tray2) can hold:
550 sheets of the standard paper.
The multipurpose feeder (MPF) can hold:
150 sheets of the standard paper.
Print Media Dimensions
The maximum dimensions of print media that tray1 and the optional 550-sheet feeder can handle are:
Width — 148 mm (5.83 inches) to 215.9 mm (8.5 inches)
Length — 210 mm (8.27 inches) to 355.6 mm (14.00 inches)
The maximum dimensions of print media that the MPF can handle are:
Width — 76.2 mm (3.00 inches) to 215.9 mm (8.5 inches)
Length — 127 mm (5.00 inches) to 355.6 mm (14.00 inches)
Loading Print Media in Tray1 and the Optional 550-Sheet Feeder
This section describes how to load letterhead. For details about loading print media other than letterhead, see
To avoid paper jams, do not remove the tray while printing is in progress.
Use only laser print media. Do not use ink jet paper in the printer.
Loading Letterhead (Pre-Printed and Pre-Punched Paper)
The pre-printed paper such as letterhead and pre-punched paper must be inserted top edge first with the print side
facing up for Dell C3760n Color Laser Printer. As for Dell C3760dn Color Laser Printer, the pre-printed paper such
as letterhead and pre-punched paper must be inserted bottom edge first with the print side facing down as shown
For Dell C3760dn Color Laser Printer, set Letterhead 2 Sided or
and Paper Type to Letterhead, Preprinted, or Prepunched from the operator panel or the printer driver even when
you print on a single side of letterhead, pre-printed, or pre-punched paper.
Letterhead Duplex Mode
Loading Print Media