9. Press
or
button until Tray Settings appears, and then press
10. Press
or
button until Tray 1 appears, and then press
11. Press
or
button until Paper Type appears, and then press
12. Press
or
button until the desired paper types appears, and then press
13. Press
button.
14. Press
or
button until Paper Size appears, and then press
15. Press
or
button until Custom Size appears, and then press
16. Press
or
button until the desired paper size appears, and then press
Loading Letterhead
When using the standard 250-sheet tray or optional 250-sheet feeder, the letterhead enters the printer last with the print side facing up.
When using the single sheet feeder, the letterhead enters the printer first with the print side facing down.
Print media source
Standard 250-Sheet Tray
Optional 250-Sheet Feeder
Single Sheet Feeder
Loading Envelopes
Use the following guidelines when loading envelopes in the standard 250-sheet tray:
NOTE:
If you do not load envelopes in the standard 250-sheet tray right after they have been removed from the packaging, they may bulge. To avoid
jams, flatten them as shown below before loading them in the standard 250-sheet tray.
Envelope#10
Load the envelopes short edge feed with the flaps closed and the print side up. Ensure that the flaps come at the right when you face towards the printer.
Downloaded from ManualsPrinter.com Manuals
(Set) button.
Print side
Face up
Letterhead enters the printer last
Face down
Letterhead enters the printer first
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
Page orientation