Middle Tray Safety Switch; Removal; Installation - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler

3.4.34 Middle Tray Safety Switch

Refer to the exploded diagram (Figure 4-31, "Middle Tray" on page 175).

3.4.34.1 Removal

1. Remove the Middle Tray Front Cover. (Refer to "Middle Tray Front Cover"
on page 68)
2. Pull out J285A from the Safety Switch.
3. Remove two screws securing the Switch to the Tray frame and remove
the switch.

3.4.34.2 Installation

1. Install the Middle Tray Safety Switch to the Middle Tray Front Cover.
2. Ensure Switch Actuator is under the resinous Link.
3. Secure the Switch to the Tray frame with two screws.
4. Connect J285A to the Safety Switch.
5. Install Middle Tray Front Cover. (Refer to "Middle Tray Front Cover" on
page 68)
Disassembly and Assembly Disassembly and Assembly
J285A
Figure 3-41. Middle Tray Front Cover
Revision A
76