Roller Unit; Removal; Installation - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler

3.4.88 Roller Unit

Refer to the exploded diagram (Figure 4-47, "Frame Transport, Rear" on page
194).

3.4.88.1 Removal

1. Remove the Transport Assembly. (Refer to "Transport Assembly" on
page 130)
2. Remove the Roller Unit from the Shaft of the Bracket Assembly.

3.4.88.2 Installation

1. Place the Roller Unit as the flat side of the Roller faces the opposite of the
Bracket.
2. Install the Roller to the Shaft of the Bracket Assembly.
3. Install the Transport Assembly. (Refer to "Transport Assembly" on
page 130)
Figure 3-97. Roller Unit
Disassembly and Assembly Disassembly and Assembly
Revision A
135