L/H Cover Low; Removal; Installation - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler

3.4.5 L/H Cover Low

Refer to the exploded diagram (Figure 4-25, "HCS Covers Front" on page 166).

3.4.5.1 Removal

1. Remove HCS from the printer. (Refer to "Finisher Stapler" on page 35)
2. Remove Transport Assembly (Refer to "Transport Assembly" on
page 130)
3. Remove six screws securing L/H Cover Low to HCS frame.
4. Remove L/H Cover Low from the frame.

3.4.5.2 Installation

1. Place L/H Cover Low to HCS frame.
2. Secure L/H Cover Low to the HCS frame with six screws.
3. Install Transport Assembly. (Refer to "Transport Assembly" on page 130)
4. Connect HCS and the printer. (Refer to "Finisher Stapler" on page 35)
Disassembly and Assembly Disassembly and Assembly
Figure 3-9. L/H Cover Low
Revision A
44