EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler
3.4.9 Add Cover
Refer to the exploded diagram (Figure 4-26, "HCS Covers Rear" on page 167).
3.4.9.1 Removal
1. Remove one screw securing the Add Cover to the HCS frame.
2. Remove the Add Cover.
3.4.9.2 Installation
1. Place the Add Cover as shown in the Figure 3-13.
2. Slide the Add Cover parallel to the frame as tabs of the HCS frame come
onto the rectangular cutouts of the Add Cover.
3. Secure the Cover to HCS frame with one screw.
Disassembly and Assembly
Disassembly and Assembly
Figure 3-13. Add Cover
Revision A
47