EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler
3.4.18 Bottom Tray Front Cover
Refer to the exploded diagram (Figure 4-29, "Lower Tray" on page 172).
3.4.18.1 Removal
1. Remove Bottom Tray Assembly. (Refer to "Bottom (Lower) Tray
Assembly" on page 57)
2. Break open Bottom Tray Front Cover and remove the Cover.
3.4.18.2 Installation
1. Install the Front Cover to the Bottom Tray.
2. Install Bottom Tray Assembly. (Refer to "Bottom (Lower) Tray Assembly"
on page 57)
Bottom Tray
Front Cover
Figure 3-23. Finisher Stapler Interlock Sensor and Actuator
Disassembly and Assembly
Disassembly and Assembly
Revision A
58