Epson EPL-N4000 Service Manual page 49

EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler
4. Fix the wire harness by Top Harness Clamp and Bottom Harness Clamp.
5. Install Finisher Stapler PWB Cover to the HCS frame.
6. Secure Finisher Stapler PWB Cover to the HCS frame with four screws.
7. Install Harness Cover. (Refer to "Harness Cover" on page 46)
8. Install Harness Cover to the frame by sliding as tabs on HCS frame comes
onto the rectangular cutouts of Connector Cover.
Ensure AC Power Cable goes through the rectangular cutout of
Connector Cover.
9. Secure Harness Cover to the HCS frame with one screw.
Disassembly and Assembly Disassembly and Assembly
Revision A
49