Transport Cover Assembly; Removal; Installation - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler

3.4.89 Transport Cover Assembly

Refer to the exploded diagram (Figure 4-48, "Frame Transport, Open" on page
195).

3.4.89.1 Removal

1. Remove the Transport Assembly. (Refer to "Transport Assembly" on
page 130)
2. Open the Transport.
3. Remove the screw securing the Cover Support Strap to the Transport.
4. Carefully break remove the rear Pivot hole of the Cover from the Pivot
axis of the Transport with the slotted screwdriver. (Refer to step 2 of the
Figure 3-98)
5. Remove the Transport Cover Assembly.

3.4.89.2 Installation

1. Insert the front Pivot of the Cover to the front Pivot hole of the Transport.
(Refer to step 1 of the Figure 3-98)
2. Insert the rear Pivot of the Cover to the rear Pivot hole of the Transport
with the slotted screwdriver. (Refer to step 2 of the Figure 3-98)
3. Install the Cover Support Strap to the Transport with one screw.
4. Install the Transport Assembly. (Refer to "Transport Assembly" on
page 130)
Disassembly and Assembly Disassembly and Assembly
Figure 3-98. Transport Cover Assembly
Revision A
136