Epson EPL-N4000 Service Manual page 139

EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler
8. Secure the Gear tot he Shaft with E ring.
9. Ensure the Transport Drive Belt goes through the upper side of the Gear.
(For the right position of the Drive Belt, refer to "Transport Assembly
Drive Belt" on page 131)
10. Install the Bracket Assembly to the Transport Frame.
11. Secure the Ground Wire with one screw as shown in the Figure 3-100.
NOTE: This screw also secures the Bracket Assembly to the Transport
Frame.
12. Secure the Bracket Assembly to the Transport Frame with another screw.
13. Install the IN Gate Solenoid Assembly. (Refer to "IN Gate Solenoid
Assembly" on page 134)
14. Hang the Tension Spring on the Bracket Assembly.
15. Ensure J261 is connected to the Transport Interlock Sensor.
16. Put the wire harness under the harness clip on the Bracket Assembly.
17. Install the Transport Assembly. (Refer to "Transport Assembly" on
page 130)
Disassembly and Assembly Disassembly and Assembly
Revision A
139