EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler
3.4.4 L/H Cover
Refer to the exploded diagram (Figure 4-25, "HCS Covers Front" on page 166).
3.4.4.1 Removal
1. Remove Transport Assembly. (Refer to "Transport Assembly" on
page 130)
2. Remove Rear Cover (Refer to "Rear Cover" on page 46)
3. Remove three screws securing L/H Cover to HCS frame.
4. Remove L/H Cover.
3.4.4.2 Installation
1. Install L/H Cover by first siding L/H Cover front end into the Front Cover.
2. Place L/H Cover to the frame as threaded holes of the frame and those of
L/H Cover be at the same position.
3. Secure L/H Cover to HCS frame with three screws.
4. Install Rear Cover. (Refer to "Rear Cover" on page 46)
5. Install Transport Assembly. (Refer to "Transport Assembly" on page 130)
Disassembly and Assembly
Disassembly and Assembly
Figure 3-8. L/H Cover
Revision A
43