Top Tray Safety Switch; Removal; Revision A; Installation - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler

3.4.43 Top Tray Safety Switch

Refer to the exploded diagram (Figure 4-34, "Top Tray Frame" on page 180).

3.4.43.1 Removal

1. Remove the Top Tray Front Cover. (Refer to "Top Tray Front Cover" on
page 78)
2. Pull out J852 from the Safety Switch.
3. Remove two screws securing the Switch to the Tray frame and remove
the switch.

3.4.43.2 Installation

1. Install the Top Tray Safety Switch to the Middle Tray Front Cover.
2. Ensure Switch Actuator is under the resinous Link.
3. Secure the Switch to the Tray frame with two screws.
4. Connect J852 to the Safety Switch.
5. Install Top Tray Front Cover. (Refer to "Top Tray Front Cover" on
page 78)
Disassembly and Assembly Disassembly and Assembly
J852
Figure 3-51. Top Tray Front Cover

Revision A

86