Up And Down Of Finisher Stapler - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler

3.2 Up and Down of Finisher Stapler

Finisher Stapler moves up when outputting to the bin 3. This is due to for
paper eject bin to move up.
For the safety measures, the paper eject bin can be lowered.
Finisher Stapler moves up and down under the following condition.
1. When applying the power;

When the Finisher Stapler is at bin 2 or bin 3, it moves down to bin1.

Stop button is unavailable.

No panel indication during the move.
2. When ejecting the paper to the staple Stacker;

Move to the target bin.

The panel indication during the move is the same as at the normal
printing operation.

When the EPL-N4000/EPL-N4000+ generates an error, Finisher Stapler
moves to the target position. If the printer does not start printing
again after the Finisher Stapler has moved for about one minute, the
Finisher Stapler moves down to bin 2 or bin 1 as same as in the case
of 3.
3. After ejecting paper to the Finisher Stapler;

About one minute after paper went out of compile tray, the Finisher
Stapler moves down to the bin 2. If there are no paper on bin 2 nor on
bin 3, the Finisher Stapler moves down to bin 1.

If the paper on bin 2 and bin 3 is removed after the Finisher Stapler
moved down to bin 2, the Finisher Stapler moves down to bin 1 after
about one minute.

No panel indication during the move.
4. When pressing the stop button of the Finisher Stapler;

The Finisher Stapler moves down to bin 1.

When the stop button is pressed during the printing procedure, bin
moves down after the job finishes or after the certain set of copies
has done.
Disassembly and Assembly

When the stop button is pressed, the LED of the switch lights on and
the panel indicates "warm up".

About one minute after the Finisher Stapler moves down to bin 1, or
when the stop button is pressed again, the LED of the switch lights off
and then printer will be on line again.
Up and Down of Finisher Stapler
Revision A
34