EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler
3.4.60 Top Cover Assembly
Refer to the exploded diagram (Figure 4-39, "Transport" on page 186).
3.4.60.1 Removal
1. Open the Top Cover.
2. Remove the screw holding the Cover Bracket to the Cover.
3. Remove the pivot from the pivot hole and shift off the Top Cover and
remove the Top COver from the HCS frame.
3.4.60.2 Installation
1. Insert the Top Cover to the pivot hole of the HCS.
2. Ensure the position-marking hole of the Bracket comes to the position-
marking tan of the Cover, and determine the position by pulling the
Bracket up against the Top Cover.
3. Secure the Bracket to the Top Cover with a screw.
4. Close the Top Cover.
Disassembly and Assembly
Disassembly and Assembly
Figure 3-69. Top Cover Assembly
Revision A
105