Epson EPL-N4000 Service Manual page 36

EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler
After installing the Finisher Stapler, adjust the height of the
caster (two). The adjustment procedure is as follows.
Fixed axis
Table 3-1. Height Adjustment
1. Loosen the lock nut.
2. Adjust the height by moving up and down the Finisher
Stapler with revolving the caster fixed axis.
NOTE: Be careful not to leave any gap between Finisher
Stapler and the printer body.
3. After adjustment, fix the lock nut.
Disassembly and Assembly
Lock nut
Installation and Removal of Finisher Stapler and Stapler Cartridge
Revision A
36