Disassembly And Assembly; Outline; Preparation; Attention For Handling - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+ Optional Finisher Stapler

3.1 Outline

This chapter explains main installation and removal procedures of staple
cartridge or Finisher Stapler.

3.1.1 Preparation

Before starting removal and installation;
1. Turn off the printer.
2. Remove AC power code from the plug.
3. Wear eliminate-static wrist band to avoid damaging any electronic parts
on the print circuit board which can be easily damaged by static
electricity.

3.1.2 Attention for Handling


Parts name here may not match the name on the parts list
precisely. For example, MSI Tray Assembly is the same as
Tray Assembly MSI on parts list.

Use the screw with right type and right size when
installing the parts.
Wrong screws may damage threaded holes.
Do not inflict any unnecessary force for removing and
installing parts.

3.1.3 Notation for Removal and Installation

1. The position (R for right) on the removal and installation is noted,
provided that an operator faces printer Console Panel.
2. The arrows on the figure indicates the direction to move a component
when removing it.
3. Slash on the parts name indicates that several components share the
same initial word and have the same function. For example, "Gear In/
Feed/Out indicates "Gear In, Gear Feed, Gear Out".

Disassembly and Assembly

Outline
Revision A
33